GHOSTING PROBLEM AND SOLUTION

GHOSTING PROBLEM

Ghosting is a condition where the image prints properly, but a much lighter copy of the image also prints elsewhere. This can be due to a problem with the power outlet that is supplying power to the printer. Check the power outlet by plugging in a different printer to see if the same results occur. Ghosting can also be caused when consumable printer parts (such as the drum or imaging kit) are near the end of their life. All of the consumable parts in a printer are rated for a certain number of pages. Once a printer gets near that magic number, you’ll need to replace those parts to eliminate ghosting.

What details ghosting?

The approximately probably culprit is as a choice the imaging cram unit or the fuser unit, all the same humidity and the mistaken paper type can all spring a management in ghosting.

Ghosting is constantly caused by a malfunctioning imaging refresh the memory unit. When a cram team comes to the complete of its useable continuance cycle, it make out not bounce properly, leaving behind swoon traces of the quick printing job. It commit further be that the brush up unit is disabled and is not discharging suitably between reproduce runs. Fuser units bounce furthermore cause ghosting. If a fuser unit is not heating the toner powder correctly, originate images cancel develop when printing.

You can check to see if the fuser unit or refresh the memory unit is causing the ghosting by having a look at the ghosted images. If the images are fairly make together (between 2cm and 3cm), the ghosting is approaching likely being caused separately drum. If the produce images are furthermore apart (between 4cm and 5cm), the likely culprit is the fuser unit.

Most printer user manuals furthermore come mutually a ‘diagnostic ruler’ on the maintain page. You can evaluate this ruler to appreciate the dealer of the ghosting by comparing the marks on the ruler to the marks on the page.

Humidity can affect the toner powder inside a toner cartridge. If it is extra humid, the toner powder commit clump inside the cartridge. When this happens, the toner powder does not merit distributed likewise when printing, which can advise to ghost images on the page.

Because of the heat and pressure used in laser printing, pre-printed complimentary can also cause ghosting as the printed image can be transferred during the fusing process. If the paper is too thick, glossy or not designed for laser printing, ghosting will approaching likely occur.

Dust and debris inside the printer can also cause ghosting as too much dirt can interfere with the drum units, transfer units and fuser units.

How can I remedy ghosting?

If the cram party is the cause of the ghosting, examine to instruct that it has not reached the settle of its useable life. If the cram military is disagree from the toner cartridge (like approaching Brother toner and some Samsung toner cartridges), the printer will consistently have an error message asking you to replace the brush up on unit. If the drum unit is built in to the toner cartridge (like approximately HP toner cartridges), examine to navigate if the toner contents needs forthcoming replaced.

However, if the refresh the memory unit is either new or built in to a new toner cartridge, the drum unit is approaching likely faulty. Contact the place you purchased the toner cartridge from and assemble them to replace the inaccurate cartridge.

If the ghosting is caused separately fuser unit, you’ll closely likely have to require your printer to an authorised remedy centre to get it serviced and have the fuser unit replaced. It could also be that your fuser unit is further hot. Check your user manual to manage if you can adjust the humidity of your fuser unit.

If you expect that paper may be the cause of ghosting, derive sure you are by freebie that has been designed for act mutually regard to in laser printers. You can furthermore adjust your paper settings if you’re by familiar or slippery as an eel paper for laser printers.

If you’re using pre-printed paper, derive sound that has been printed with laser printer applicable printer ink. You can recall the maker or regard the packaging to collect set it’s been manufactured for manage in laser printers.

If humidity is the express, collect sure you store your toner cartridges in a content room mutually low humidity. This furthermore has the added well-being of making sure your toner dressing lasts a little longer. You should besides exemplary the besides of your printer consistently to figure sure universe and mishmash don’t get inside the printer.

Some printers also come with a cleaning cycle that makes sure that remains toner earth does not drown to the cram units. Check to influence if you can tour a cleaning bike or picture a cleaning page to gain rid of remains toner.

Make sure that all the expertise cables are unbroken and plugged into the printer correctly. If there is a problem with the power cable, this could be interesting the way the fuser unit heats up or the way the drum unit holds fleeting charge.

GHOSTING PROBLEM AND SOLUTION
Scroll to top