The HP Smart Tank 5107 is an ink tank printer designed for high-volume, cost-efficient printing with easy wireless and mobile support. This guide will help you download the correct driver, complete the installation, and connect your printer via Wi-Fi or USB—with no technical experience required.
📦 What You’ll Get with the Setup
- Latest official HP driver and full software package
- Options for wireless and USB installation
- Support for printing, scanning, and copying
- Mobile printing setup for Android and iOS devices
- Troubleshooting tips for quick problem-solving
💾 Step 1: Download the Driver
Before you begin:
- Make sure your computer is connected to the internet
- Disconnect any USB cable before installation (connect only when prompted)
- Check your OS compatibility:
- Windows 11 / 10 (64-bit or 32-bit)
- macOS 10.14 Mojave and newer
You’ll want the full-feature driver, which includes:
- Printer and scanner drivers
- HP utility software
- Wireless and ink level tools
- Maintenance and diagnostic utilities
📝 Save the file to an easy-to-find location, like your desktop or downloads folder.
🛠️ Step 2: Install the Driver
For Windows:
- Open the downloaded
.exefile. - Accept the terms and follow the installation wizard.
- Choose your connection type:
- Wireless (Wi-Fi) – recommended for most users
- USB – plug in only when prompted
- Let the setup tool detect your printer and complete configuration.
- Test the printer by printing or scanning a page.
For macOS:
- Open the
.dmginstaller. - Drag the HP Installer to Applications if needed.
- Launch the installer and follow the prompts.
- Select the connection method (Wi-Fi or USB).
- Add the printer in System Preferences > Printers & Scanners once setup is complete.
🌐 Step 3: Connect HP Smart Tank 5107 to Wi-Fi
To enable wireless printing:
- Press and hold the Wi-Fi button on the printer until the wireless light starts blinking.
- Open the installation software or HP utility on your computer.
- Select Wireless Setup, choose your Wi-Fi network, and enter the password.
- Wait until the printer connects (steady Wi-Fi light confirms success).
📝 Ensure your computer or phone is connected to the same network.
📱 Set Up Mobile Printing (Optional)
You can print from your smartphone or tablet in just a few taps:
- Android: Use built-in Mopria or download a compatible print app
- iOS: Use AirPrint to print directly from iPhones and iPads
- Ensure your mobile device is on the same Wi-Fi network as the printer
Mobile printing allows you to send documents, photos, or web pages directly to your printer without using a PC.
🔧 Troubleshooting Common Issues
🟠 Printer Not Detected During Setup?
- Make sure it’s turned on and in Wi-Fi setup mode
- Restart your router and printer
- Temporarily disable antivirus or firewall software during installation
🟠 Wireless Setup Fails?
- Re-enter Wi-Fi credentials carefully
- Move the printer closer to your router
- Reset the network settings and try again
🟠 Installation Freezes or Errors Out?
- Restart your PC or Mac
- Re-download the driver and run the setup again
- Try switching USB ports if using a cable connection
📘 Quick Reference Table
| Step | Action |
|---|---|
| 1 | Download the full-feature HP Smart Tank 5107 driver |
| 2 | Run the installer and choose USB or wireless connection |
| 3 | Follow prompts to detect and install the printer |
| 4 | Connect the printer to Wi-Fi via the Wireless button |
| 5 | Set up optional mobile printing |
| 6 | Use troubleshooting steps if setup fails |